Welcome to the staging ground for new communities! Each proposal has a description in the "Descriptions" category and a body of questions and answers in "Incubator Q&A". You can ask questions (and get answers, we hope!) right away, and start new proposals.

Are you here to participate in a specific proposal? Click on the proposal tag (with the dark outline) to see only posts about that proposal and not all of the others that are in progress. Tags are at the bottom of each post.

Post History

60%

+1 −0

Incubator Q&A Bringing Adventurer 5M Pro's base plate down after finishing a print

Turns out, there is a "Homing" button hidden in the settings menu. Click on the cog wheel in the left sidebar of the touch screen to go to the settings page: Once in the settings menu, there is...

posted 8mo ago by samcarter‭

Answer

#1: Initial revision by

samcarter‭ · 2024-09-15T12:37:37Z (8 months ago)

Copy Link

Raw

Markdown

Turns out, there is a "Homing" button hidden in the settings menu.

Click on the cog wheel in the left sidebar of the touch screen to go to the settings page:

![screenshot of the touch screen. On the left, there are five buttons for navigations. The second lowest is an image of a cog wheel which will open the settings](https://proposals.codidact.com/uploads/sc38xk0ccb3e56gijtzsyoaz3ume)

Once in the settings menu, there is the homing button on the lower left, which looks approximately like this:

![icon with a counter-clockwise circular arrow with a zero in the centre](https://proposals.codidact.com/uploads/ys8v138w9e6zc8oo9igusqciitsn)

This will move the base plate all the way to the bottom.

Communities

Post History